step 1 scan wifi networks from your phone or smart device

look for AC-**** as this is your new LAC system

Enter the password of the wifi 

you should get a connecteed without internet message

Navigate to your favorite web browswer

Type in the the LAC ip address in your top address bar.

192.168.4.1

You will now be on the main home page of the system.

Press Read Distance to start reading values and settings

1. 

Press Read Distance to start readings

2. 

real time readings of the distance

3. 

setpoint of your Stop distance( relay 1)

4. 

setpoint of your Slow distance( relay 2)

5. Relay 1 status on or off 

6. 

Relay 2 status on or off 

7.press the config menu

1.

Press Read Distance to start readings

2.

real time readings of the distance

3.

setpoint of your Stop distance( relay 1)

4.

setpoint of your Slow distance( relay 2)

5.

Relay 1 status on or off 

6.

Relay 2 status on or off 

7.

proceed to config menu to setup setpoints

2. setpoint distance of slow relay

5. select between feet or mm 

3. click submit to change it

4. click submit to change it

5. feet is standard , use mm for more precision

Bypass the relays to move the crane temporarily.

select a time from the dropdown or just press start bypass for 30 sec default

the relays will close for the options in the drop down and then go back to there normal status after the timer is up.

the Relay is normally Closed after boot up and the relay will open once it reaches its setpoint. some cranes need a Normally open contact 

select the relay you want  to chang the mode for and choose NC or NO.  NC is default.